SUBJECT: Service Manual Revision ­Alignment Specifications
NO: 02­06­94
GROUP: Suspension
DATE: Jul. 1, 1994
MODELS: 1995 (PL) Neon
DISCUSSION:
This technical service bulletin contains revised service manual pages. The revisions are marked with **ASTERISKS**.
Please insert the attached revised service manual page in the appropriate service manual.

MANUAL TITLE PUBLICATION NO. PAGES CHANGE
1995 Neon 81­270­5025 2­67 Alignment Specifications For Sales Code ACR
POLICY: Information Only

 

 

SPECIFICATIONS

ALIGNMENT SPECIFICATlONS AT CURB HEIGHT

 

FRONT WHEEL ALIGNMENT ACCEPTABLE ALIGNMENT RANGE AT CURB HEIGHT PREFERRED SETTINGS
CAMBER -0 4° TO +0 4
** -2 4° TO +0 4 [S/C ACR) **		 +0.0°
TOTAL TOE All Vehicles (See Note) Specified in Degrees *. 0.30° IN TO 0.10° OUT
*. 0.30° IN TO 0.70° OUT (S/C ACR)		  
CASTER.    
All Models'

Side To Side Caster Differential Not to Exceed

 +1.8 ° TO +3.8
1.0° OR LESS		 +2.8

0.0°
REAR WHEEL ALIGNMENT ACCEPTABLE ALIGNMENT RANGE AT CURB HEIGHT PREFERRED SETTING
CAMBER AII Models -0.75° +0.25°
-1.00° TO +0.25' S/C ACR)*		 -0.25°
TOTALTOE. All Vehicles (See Note) Specified in Degrees *. 0.30° IN TO 0.10° OUT
0.30° IN TO 0.50° OUT (S/C ACR) **		 0.1° IN
THRUST ANGLE·
NOTE: TOE OUT When Backed On Alignment Rack Is TOE IN When Driving.		 -0.10 TO +0.10°  

NOTE: Total toe is the arithmetic sum of the left and right wheel toe settings. positive is Toe-in negative is Toe-out. Total Toe must be equally split between each front wheel to ensure a centered steering wheel Led and Right lee must be equal to within 0.02 degrees

·Setting of vehicles front suspension to specifications outside of the preferred setting will cause excessive tire wear.